Frigidaire stove repair
Frigidaire Stove Repair in San Antonio
Diagnosis and repair for Frigidaire stoves in homes, rentals and businesses across San Antonio.
Call or use the form, and we'll offer you the earliest appointment we have.
Two short steps: the appliance, then how to reach you. We'll contact you to arrange the visit.
Independent repair, not a factory service center
TrueFix San Antonio is an independent repair company, not a Frigidaire service center. If your stove is still under the manufacturer's warranty, contact Frigidaire first, since warranty work normally has to go through their own service network.
How a Repair Visit Works
Call or Book Online
Tell us the appliance, the brand, the model number if you have it, and what it's doing.
On-Site Diagnosis
A technician finds the fault on site before any price is discussed.
You Approve the Price
You get the price first. If the repair isn't worth it for your appliance, we tell you.
Repair & Test
We make the repair, test the appliance and show you what failed.
Frigidaire stove repair: what to know
A Frigidaire stove, whether a basic coil-top electric or a gas model with sealed burners, usually fails one half at a time. On the coil models, burner receptacles scorch and loosen, and a coil that only heats when wiggled usually has a burned terminal block. On gas models the oven's glow-bar igniter is the common weak point, while the surface burners depend on clean ports and dry electrodes. Many homes on CPS Energy natural gas have these older freestanding Frigidaire stoves, and most of their parts are still stocked.
Worth knowing about Frigidaire: Frigidaire is Electrolux's mainstream North American brand, so the two share many parts and repair procedures and parts are generally easy to get. Also, Frigidaire Gallery and Professional models often share mechanical parts with the base models but not their control boards, so the full model number matters on this brand.
Common Frigidaire stove failures
These are the failure points to check first on a Frigidaire stove:
- Coil burner receptacle scorched or loose
- Oven glow-bar igniter slowing down
- Surface burner ports blocked by boil-overs
- Oven bake element split or blistered
- Anti-tip bracket missing after a move
A list like this points the diagnosis in the right direction, but one symptom can come from parts at very different prices, so the cause is confirmed at your home before you get a quote.
How we diagnose a Frigidaire stove
Whatever the brand, on a stove we check burners and igniters first, the oven's sensor and element next, the door last — cooktop and oven fail independently, so we pin down which side is actually at fault.
One stove problem that often sends people to the wrong part is a burner that keeps clicking, which usually means a wet or dirty igniter rather than an electrical failure and often stops once the burner is properly cleaned and dried.
What Frigidaire stove repairs usually involve
Parts for Frigidaire are made in volume and stocked by many suppliers. On a Frigidaire stove, the parts that wear out are mostly inexpensive ones: igniters, surface elements and their switches, bake elements and temperature sensors.
The bill changes when the fault is an electronic control board or a gas safety valve. On a newer unit that can still be a sensible repair; on one well into its working life, it's often the point where replacing makes more sense, and you'll hear that at the diagnosis.
Before the visit
The model and serial number are behind the storage drawer, on the frame behind the oven door, or on the back. A photo of that label is the most useful thing you can send when you book: it tells us which Frigidaire platform you have and which parts to bring.
Work out which half has the problem, a burner or the oven. Check that burner caps are seated and the igniters are clean and dry, and note any error code on the control.
In San Antonio, keep in mind the split between gas and electric kitchens across San Antonio, which means one model family often comes in both versions with different parts.
Frigidaire Stove Questions
Answers specific to Frigidaire stoves. For anything else, ask when you book.
Ready to book?
Tell us the appliance, the brand and what it's doing, and we'll offer you the earliest appointment we have.
The burner receptacle it plugs into is probably burned or loose, or the coil's terminals are pitted. Running it that way arcs and gets worse. Replace the receptacle and, if its terminals are damaged, the coil too.
Watch through the window with the oven set to bake. If the igniter glows but there's no flame after a minute or two, the igniter is usually too weak. If it doesn't glow at all, the igniter, a control or a wiring connection has failed.
Yes. Freestanding stoves ship with one, and it should hook the rear leg. If the stove lifts at the back when you press down on the open oven door, the bracket is missing or not engaged.
Which half failed and which part. Burner caps, igniters and infinite switches on the cooktop are small parts; oven igniters, elements and sensors are routine; control boards and glass tops cost more. The quote comes after testing.
Stove brands we repair
Every Frigidaire appliance we repair · Stove repair for all brands