Fisher & Paykel Washer Repair in West San Antonio

Fisher & Paykel washers have included top-loaders with the SmartDrive direct-drive motor and, more recently, front-loaders. SmartDrive machines drive the basket directly with no belt or gearbox, and faults are reported through the machine's error codes, which point to the motor, water level sensing or drain circuit. On any model, a pump blocked by a sock or coin causes many of the drain faults, and SAWS's hard water gradually narrows the inlet valve screens.

Failure points to check on a Fisher & Paykel washer:

In West San Antonio, a washer might drain into hundred-year-old pipe or into PEX installed last year. We look at the supply valves and drain as well as the machine, because the hookup is often where the fault is.

Many West San Antonio households move on military orders, and washers take a beating in the move. A washer shifted without its shipping bolts, or a dishwasher hose pinched during installation, causes problems that look like part failures.

One washer symptom that's easy to misread is a washer error code taken to mean a broken part when it's describing a situation: an off-balance load, a water valve only partly open, or a drain hose shoved so deep into the standpipe that it siphons.

Front-loaders have a drain filter behind a small panel at the bottom; check it for socks and coins. Make sure both water valves are fully open and the drain hose isn't pushed too far down the standpipe, and write down any error code.